Geophysical equipment
Our products
Donwload catalog
Yass mechanical
Yass mechanical (Mechanical hammer) is designed to create a shock down for various technological operations for repair and geophysical works in oil and gas wells. Blows up are less effective. One lowers into the well as part of a set of tools on the cable equipment wire, rope or cable.
Technical parameters:
Connecting thread: M24 х 2The diameter of the fishing neck 35 mm
External diameter: 44-48 mm
Stroke length: 760 mm
Drummer hydraulic HS-220
Drummer hydraulic HS-220 is designed to create a hydraulic shock pulses up for various technological operations for repair and geophysical works in oil and gas wells. Lowered into the well as part of a set of tools on the cable equipment wire, rope or cable.
Technical parameters:
Connecting threads: M24 х 2The diameter of the fishing neck 35 mm
Outer Diameter: 39 mm
Maximum cable tension cable on hit: 250 kg
Hinge Sh-16
Hinge Sh-16 is designed to deflect the cable set art tools from the axis. Hinge is used for various technological operations for repair and geophysical works in oil and gas wells.
Technical parameters:
Connecting threads: M24 х 2Outer diameter: 38 mm
The diameter of the fishing neck 35 mm
Off-axis angle: 8º
Catcher collet L35
Catcher collet L35 (The safety device) is designed to capture a fishing neck for the extraction equipment and devices from the well, as well as for her descent into a variety of devices and then disconnecting.
Technical parameters:
Connecting threads: M24 х 2The diameter of the fishing neck 35 mm
The diameter of the fishing neck of recoverable equipment: 35 mm
Modifications catchers:
For removing the equipment from the fishing neck 36 mm, 42 mm, 43 mm, 44 mm, 56 mm or on request.
The preventer hydraulic lubricator
The preventer hydraulic lubricator (Cable preventer) is designed for sealing the wellhead to be in it with a wireline tool or a hammer, in order to prevent gas leaks and repair work in the lube plant. The preventer overlaps well with both the wireline, and without it, in the case of wear and tear gland lubricator device or breakage of one of the wires of the wireline.
Technical parameters:
Operating pressure: 35 MPa
Operating pressure in the hydraulic system 10 MPa
Operating temperature range: -40 to +55
Pipe grab external TNN-42
Pipe grab external TNN-42 (Spear outdoor non-realizing) designed to capture the outer surface of the pipe with a diameter of 42 mm. Lowered into the well as part of a set of tools on the cable equipment wire, rope or cable.
Technical parameters:
Connecting thread: M24 х 2
The diameter of the fishing neck 35 mm
Outer Diameter: 56 mm
Recoverable tube diameter: 40 mm
Set Strip type tool
Technical parameters:
Connecting thread: M33 х 1,5
Outer Diameter: 42 mm
The diameter of the fishing neck 35 mm
The piston gland ULG 65-35
Technical parameters:
Connecting thread: M 24 х 1,5
The diameters of the sealing surfaces: 36 mm, 60 mm
Length: 88 mm
Lubricator seal (stuffing head) UGL 65-35
Gland head lubricator unit is designed for sealing cable during tripping operations in the well with the pressure at the wellhead.
Shock mechanical head
Technical parameters:
Connecting threads:
Pipe Thread NKTV-73 GOST 633-80
Coupling thread ACME thread 23/4 6 threads per 1'' (M76 х 3, M80 х 3)
Outer Diameter: 89 mm
Length: 214 mm
Shock mechanical head
Technical parameters:
Connecting threads:
Pipe Thread NKTV-73 GOST 633-80
Coupling thread ACME thread 23/4 6 threads per 1''
Outer Diameter: 86 mm
Length: 280 mm
Shank of punch
Technical parameters:
Thread type ACME 213/16'' 6 threads per 1''
Outer Diameter: 86 mm
Length: 162 mm
Shank of punch
Technical parameters:
Connecting thread: M80 х 3
Outer Diameter: 89 mm
Length: 205 mm
Head of punch
Technical parameters:
Connecting threads:
External thread:
The thin-walled: M80 х 3
Thick-walled: M76 х 3
Outer Diameter: 89 mm
Length: 205 mm
Probe adapter unit MEGA
Technical parameters:
Connecting threads:
Version 1: M33 х 1,5; M22 х 1,5
Version 2: M55 х 2; M36 х 1
The length and diameter of the work piece are made individually, taking into account the requirements and wishes of the customer.
Tandem
Technical parameters:
Connecting threads:
Thread type ACME ACME 23/4'' 6 threads per 1''
Thread type ACME 213/16'' 6 threads per 1''
Outer diameter: 86 mm, 89 mm
The sub flushing (acceleration chamber)
Technical parameters:
Connecting threads NKT73 GOST 633-80
Outer Diameter: 89 mm
Length: 246 mm
Cable Hammer head
Technical parameters:
Connecting thread: M48 х 3
Outer diameter: 60 mm
Length: 322 mm
Fishing necks diameter: 50 mm, 56 mm
Cable lug
Technical parameters:
KH 3 x 60, KH 60
Outer diameter: 60 mm
Fishing necks diameter: 56 mm, 60 mm
KH 3 х 42 , KH 42
Outer diameter 42 mm
Fishing necks diameter: 36 mm, 42 mm
Double row sprockets
Technical parameters:
Connecting thread: M24 х 2
The diameter of the fishing neck 35 mm
External diameter: 44-48 mm
Stroke length: 760 mm
Adapters
Adapters are designed for mechanical and electrical connection heads downhole geophysical instruments of different sizes with cable lugs.
GUOBIE series for electrodriling (Telesystems)
Geophysical devices GUOBIE series (instead of telemetry systems Series STE) are available in diameters of 127 mm, 164 mm, 185 mm and 215 mm and designed to monitor drilling parameters when posting directional and horizontal wells electric drills.
In accordance with TU U 30655039.003-2001.
Geophysical devices allow to measure the following parameters while drilling:
- Zemith angle.
- Magnetic azimuth.
- Whipstock orientation angle.
- Whipstock azimuth.
| Parameter | Variation range | Std.dev |
|---|---|---|
| Zenith angle, degrees | 0…120 | +1 |
| Whipstock orientation angle, degrees | 0…360 | +3 |
| Azimuth (magnetic), degrees | 0…360 | +3 |
| Whipstock azimuth, degrees | 0…360 | +3 |
Download print version
GUOBIE-S series for turbodrilling (Telesystems)
Geophysical devices GUOBIT series are designed to monitor drilling parameters when posting directional and horizontal wells, as well as sidetracking horizontal sidetracks from old wells using hydraulic downhole motors.
In accordance with TU U 30655039.002-2001.
Geophysical devices allow to measure the following parameters while drilling:
- Zemith angle;
- Magnetic azimuth.
- Whipstock orientation angle.
- Whipstock azimuth.
- Bottom hole temperature.
- Docking control.
- Control of natural radioactivity of formations.
The downhole tool (immersion device) is connected directly to the wireline geophysical head, and the information is transmitted to the surface on a single conductor logging cable, that helps to descend (ascend) into the well. A non-magnetic special docking device with external diameters from 95 mm to 215 mm is used for its landing in the hole. Output from the wireline-tube into the annular space is done with the help of the link sub. Parameters of gamma ray are displayed on a personal computer.
Indication of downhole parameters can be carried out on both the receiving - transmitting device, that the part of the geophysical devices and on the personal computer. Downhole tool diameter is 36 mm, and a gamma ray log- device 42 mm. Removing and replacing the downhole tool is carried out without lifting the drilling tool.
| Parameter | Variation range | Std.dev |
|---|---|---|
| Zenith angle, degrees | 0…180 | 0,5 |
| Whipstock orientation angle, degrees | 0…360 | ±1 |
| Azimuth (magnetic), degrees | 0…360 | ±3 |
| Whipstock azimuth, degrees | 0…360 | ±3 |
| Bottom hole temperature, °С | 0…+100 | ±2 |
| Gamma ray, µR/hr | 10…200 | ±12% |
Download print version